What is the tool repair function of the wire cutting machine tool?

The end of the tool repair function of the wire cutting machine tool. First of all, it is required that the parameters can be automatically jumped on the system, and the system must support knife repair. If not, it is not advisable to switch the parameters manually.

Ordinary wire-cutting machine tool, cut with one knife, directly cut the workpiece. However, the wire-cutting machine tool is modeled on the process of slow-moving wire. When making a one-knife cut, reserve 5%--10% of the boss to prevent the workpiece from falling off, and then carry out a trimming. in this process

. The system software will change the parameters, and adjust the wire speed of the wire to the corresponding speed through the lowered parameters and high frequency.

The medium wire cutting machine requires that the high-frequency power supply can be switched to smaller parameters, and the frequency converter is required to complete the conversion of the wire speed. When repairing the knife, adjust the speed of the wire to be smaller and smaller, so that the molybdenum wire works more and more smoothly, and a better finish can be achieved.

The medium-travel wire cutting machine tool is then repaired by the process of the slow-travel wire cutting tool. Carry out the incision of the boss. If the boss also needs to be repaired accordingly, follow the slow wire process, plug the remaining slits with copper sheets, and then stick them with 502 glue, and then repair the boss. A perfect workpiece can be obtained.