The specific operation steps of CNC wire cutting from start-up to the end of processing:

(1) Turn on the main power switch.

(2) Press the white lighted button on the panel, the light is on, the computer starts, and the welcome screen is entered after the system self-checks.

(3) Press the green button on the panel, the electrical part of the machine tool can work normally.

(4) Press any key to enter the main menu

(5) Press the F2 key to enter the Edit menu.

(6) Press the F1 key to generate a new ISO file. At this time, the system prompts the user to enter the file name. After the user enters TEST, press the Return key, and the system enters the editing state.

(7) Input program

(8) Press F1 to save and exit the editing state, the TEST.ISO file already exists in the system.

(9) Press the F8 key to return to the main menu, press the F5 key to enter the Manual menu, press F1 to enter the Per_wire menu, and complete the threading work and the threading work through the threading button.

(10) Return to the main menu and press F7 to enter the Run menu. At this time, the system prompts the user to select a file, move the red cursor to TEST.ISO, and press the Enter key to select the file.

(11) Press F1, select the Draw command, and draw a moderately sized figure on the screen through the Window command.

(12) Return to the Run menu, select F2 (Dry_run), and press F1 (Continue) to check the cutting graphics.

(13) Return to the Run menu, select F3 (E_par), and select the appropriate processing parameters.

(14) Return to the Run menu, select F7 (Cut), the system will automatically turn on the wire transport motor and the working fluid pump, please adjust the working fluid valve so that the working fluid just wraps the molybdenum wire and flows down, while observing the processing voltmeter and ammeter, press F6 Or F7 to adjust the feed speed to make the processing stable.

(15) After cutting, the system prompts "CutEnd, Selectmenuplease".

(16) Select the F8 key to return to the main menu.

(17) Press the power off button, the monitor screen turns black.

(18) Turn off the main power switch.